Pair of Audi seat side trim panels wrapped in leather and Alcantara with red contrast stitching, factory seat adjustment switches and memory dial in place
Audi seat side trim comparison, factory black plastic panel above and the same panel wrapped in leather and Alcantara with red stitching below
Close up of a wrapped Audi seat side trim switch area, Alcantara surround with the original seat adjustment switches, lumbar button and memory dial
Macro detail of red double stitching along the leather edge of an Audi seat side trim panel, Alcantara texture below
Factory AIRBAG marking retained on a leather wrapped Audi seat side trim panel with red contrast stitching

CarbonXtreme

Wrapped Seat Side Trim (Pair) | Leather and Alcantara, Audi RS and S Models

$349.00 USD
Material
Material: Microfiber Leather
Configuration
Configuration: Pair — Wrapping only (with your seat order)

Make It Match

Panel shapes differ by model, and stitching should match the seats it sits against. Both are confirmed with you before production.

Switch modules differ between memory and non-memory seats and are not interchangeable. If you are ordering complete panels, we need this to source the correct parts.

Secure Payment Encrypted checkout with Apple Pay, Google Pay & major cards
30-Day Returns Buy with a clear return window →
Worldwide Dispatch Ships from our Germany, China, and US warehouses
Strict QC We ship only when the part passes inspection
Shipping Estimate

Free Shipping on Orders $199 and Over

FedEx Air Small and Medium shipments ship free automatically when your order subtotal reaches $199 USD.

 

Small (under 5 kg)

FedEx/DHL Air: $60 | Est. 5–8 business days

 

Medium (5–10 kg)

FedEx/DHL Air: $110 | Est. 5–8 business days

 

Large Parts (10–30 kg)

Sea Freight Express: $149 | Est. 14–22 days

Air Freight: $280 | Est. 7–12 business days

 

Oversize Freight (30–45 kg — hoods, bumpers, wide body kits)

Sea Freight Standard: $349 | Est. 33–42 days

Sea Freight Express: $549 | Est. 14–22 days

Air Freight: $850 | Est. 10–15 days

 

Heavy Freight (45 kg and up — full body panels and complete seat sets)

Sea Freight Standard: $500 | Est. 33–42 days

Sea Freight Express: $700 | Est. 14–22 days

Air Freight: $1,450 | Est. 10–15 days

 

$1,450 Air / $700 Sea Express is our maximum rate. We absorb any extra freight cost on large orders.

The shipping rate shown at checkout is locked when your order is placed.

Wrapped Seat Side Trim

The one panel most builds forget. Your factory seat side trim is hard black plastic, sitting right where your hand rests and your leg brushes past on the way out. We wrap it in leather and Alcantara with contrast stitching, finished to match the seats it sits against.

What gets wrapped

The outer trim panel on each front seat, the one carrying your seat adjustment switches, memory buttons and lumbar control, with the AIRBAG marking on the shoulder. Your switches and buttons work exactly as before. Sold as a pair, driver and passenger.

Two ways to order

  • Wrapping only, with your seat order. Your new bucket seats already arrive with their side trim panels. We wrap those panels as part of the same build, so you are paying for the craft alone. The lowest way in.
  • Complete panels supplied, standalone. We supply brand-new panels with the switch modules fitted, wrapped and ready to bolt straight on. Nothing comes off your car and nothing gets shipped to us.

Ordering standalone? Switch modules differ between memory and non-memory seats, and between models. Tell us whether your seats have memory function in the field above the Add to Cart button so we source the correct parts.

The Alcantara we use

Genuine Alcantara in 9002 Charcoal Black, Panel specification. Panel is the single-layer unbacked grade, thin and elastic, made specifically for wrapping hard trim, door cards and pillars rather than seat surfaces. It is the correct grade for this part: it follows the panel's compound curves and stays flat at the edges.

Choosing your material

  • Microfiber Leather. Animal-free, even grain, wraps tight to the panel's curves. The clean baseline.
  • Microfiber Leather and Alcantara (recommended). Leather on the outer wear face, Alcantara on the flat inner section. See the note below on why we build it this way.
  • Full Alcantara. Alcantara across the whole panel, for interiors already built around it.

Leather where it wears, Alcantara where you touch

The forward face of this panel takes the brush of your leg every time you get in and out of the car. Our recommended build puts leather on that wear face and Alcantara on the flat inner section, so the panel holds its finish where it takes contact and keeps its texture where your hand falls. This is the build our upholsterer recommends, and it is a durability call rather than a cost one.

Why we do not offer full-grain hide here

Full-grain leather is too thick for this particular panel. Wrapped over these compound curves it lifts and puckers at the edges over time. We only offer materials that stay flat and stay put on this part.

Stitching

Tell us your stitching colour in the field above the Add to Cart button and we match it to your seats. No extra cost.

Production and delivery

Made to order, 7 to 14 days. Ordering alongside a set of our bucket seats? We build and ship them together. Shipping is free.

Fitment

Built for Audi front seats with powered side trim panels, including RS and S models and their A-series equivalents. Tell us your model and year in the field above the Add to Cart button and we confirm the panel shape with you before production.

Pairs with

Pairs well with